- Nov 29, 2018
- Posted by: admin
- Category: Proceeding
Brussels, Belgium
ISBN: 978-609-96043-3-6 Pub
Date: 14th September, 2018
Diamond Scientific Publishing
Category: Engineering , Science and Technology
The International conference on Applied Research in Engineering, Science and Technology on 14th and 15th of September in Brussels, intended to zoom into these innovative practices and novel ideas in diverse domains of Science, Technology and Engineering. The core focus of the conference, is promoting fundamental and applied researches for all three fields, allowing for the possibility of the seminar and exchange between professors and users in various branches.
The International conference on Applied Research in Engineering, Science and Technology expects to open the gateway and ease the path for leading academics, active researchers and industry leaders to communicate and exchange their viewpoints on developments in recent research.
An Evaluation on Low and Middle Strength Concretes Rebound, Upv, and Sonreb Methods
Muhammet Asan , Hadi Abbaszadeh and Serkan Karatosun
PhD Student, Faculty of Civil Engineering, Istanbul Technical University, Istanbul, Turkey
MS.C. Student, Faculty of Civil Engineering, Istanbul Technical University, Istanbul, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 1-10, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.34
[Abstract] [Fulltext PDF]
Improvement of the Tribological Characteristic of Bimetallic Journal Bearing With Surface Coating by Cold Spray Process
Coşkun Yolcu, Gökçe Mehmet Gençer , Fatih Kahraman and Ayça Demirer Kahraman
Mechanical Engineering Department, Dokuz Eylül University, İzmir, Turkey
Mechanical Engineering Department, Manisa Celal Bayar University, Manisa, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 11-16, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.35
[Abstract] [Fulltext PDF]
Modal Analysis of Various Truck Unloading Platforms by Finite Element Method
Erinç Uludamar , Gökhan TÜccar , Şafak Yildizhan and Hasan Serin
Adana Science and Technology University, Department of Automotive Engineering, 01250 Adana, Turkey
Çukurova University, Department of Automotive Engineering, 01330 Adana, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology ,17, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.36
[Abstract] [Fulltext PDF]
Investigation of Microstructures and Mechanical Properties of the Joints Which Welded by the Pinless Tool and the Designed Tool to Reduce the Keyhole in the Friction Stir Spot Welding
Fatih Kahraman , Ayça Demirer Kahraman , Coşkun Yolcu , Gökçe Mehmet Gençer and Muammet Tüm
Mechanical Engineering Department, Dokuz Eylül University, İzmir, Turkey
Mechanical Engineering Department, Manisa Celal Bayar University, Manisa, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 18-28, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.37
[Abstract] [Fulltext PDF]
the Application of tio2/zno nanocomposite as a New Trapping Media for Solid Phase Extraction of u and th
Funda AYDIN , Erkan YILMAZ , Gülay DEMIRKIRAN, Zeliha ERBAŞ and Mustafa SOYLAK
Van Yüzüncü Yıl University, Faculty of Pharmacy, Department of Basic Sciences, 65080, Van, Turkey
Erciyes University, Faculty of Pharmacy, Department of Basic Sciences, Kayseri, Turkey
Erciyes University, Nanotechnology Research Center, Kayseri, Turkey
Erciyes University, Faculty of Sciences, Department of Chemistry, 38039, Kayseri, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology ,29, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.38
[Abstract] [Fulltext PDF]
Evaluation of Photogrammetric Documentation Options for Ancient Monuments
Funda Gençer, Mine Hamamcıoğlu Turan
Manisa Celal Bayar University, Faculty of Fine Arts, Design and Architecture, Department of Architecture, Manisa, Turkey
Izmir Institute of Technology, Faculty of Architecture, Department of Architectural Restoration, İzmir, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology ,30-43, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.39
[Abstract] [Fulltext PDF]
Investigation of the Microstructures and Mechanical Properties of Thin 5083 Aluminum Alloy Plates Welded by Double Pulse Gmaw Method
Gökçe Mehmet Gençer , Fatih Kahraman , Coşkun Yolcu , Ayça D. Kahraman and Ali Demircioğlu
Mechanical Engineering Department, Dokuz Eylül University, İzmir, Turkey
Mechanical Engineering Department, Manisa Celal Bayar University, Manisa, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology ,44-52, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.40
[Abstract] [Fulltext PDF]
The Effect of Different Equations and Methods on R-Square Values of Ndt Correlations
Hadi Abbaszadeh , Serkan Karatosun and Servan Baran
MS.C. Student, Faculty of civil engineering, Istanbul Technical University, Istanbul, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology ,53-62, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.41
[Abstract] [Fulltext PDF]
Narration of Architecture and Built form in the Context of Changing Urban Milieu
Ar. Bhagyalaxmi S Madapur , Ar. Shanu Raina
Associate Professor, B M S College of Architecture, Bull Temple Road, Basavanagudi, Bangalore , Karnataka , India
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 63-74, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.42
[Abstract] [Fulltext PDF]
Inclusive Streets for Fostering the Notion of Public Space
Ar. Bhagyalaxmi S Madapur , Dr. Mamatha P Raj
B M S College of Architecture, Bull Temple Road, Basavanagudi, Bangalore , Karnataka , India
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 75-97, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.43
[Abstract] [Fulltext PDF]
Experimental Investigation of Extraction of Active Ingredients of Scrophularia striata Boiss (as a Medicinal Herb) via Supercritical Fluid Extraction Method with Ultrasonic Waves
Nabil vaeli ,Bizhan honarvar , Nadia esfandiari and Zahra arab
Department of Chemical Engineering, marvdasht branch, Islamic Azad University, marvdasht, Iran
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 98-110, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.44
[Abstract] [Fulltext PDF]
Evaluation of Performance of Kernel-Based Feature Extraction Techniques for Face Recognition System
Fenwa Olusayo D., Ajala Funmilola A. and Makinde Bukola O
Department of Computer Science and Engr. Ladoke Akintola University of Technology, Ogbomoso Oyo State Nigeria
Department of Computer Science, Osun State College of Technology, Esa-Oke, Osun State Nigeria.
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 111-120, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.45
[Abstract] [Fulltext PDF]
Development of an Enhanced Fuzzy C-Means algorithm for Medical Image Segmentation using Ant Colony Optimization
Ajala F.A, Ojebamigbe V.I, ,Fenwa O.D
Department of Computer Science and Engineering, LadokeAkintola University of Technology, P.M.B. 4000, Ogbomoso.
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 121-133, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.46
[Abstract] [Fulltext PDF]
An Efficient Combinatorial Approach for Beta-Lactam Antibiotics with Novel Adjuvants against Gram-Negative Organisms to Combat Multi-Drug Resistance
Chandresh Pareek , Dushyant Pareek , Narendra Nirwan and Ajay Jain
Associate Prof. Microbiology Research Lab, S.D. Govt. College Beawar, Rajasthan, INDIA
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 134-143, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.47
[Abstract] [Fulltext PDF]
The Effect of Different Plate Condition on Water Absorption Rate of Mineral Wool of Roof Panel
Servan Baran, Hadi Abbaszadeh
MS.C. Student, Faculty of civil engineering, Istanbul Technical University, Istanbul, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 144-151, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.48
[Abstract] [Fulltext PDF]
Studying the Interrelation of the Physical and Mechanical Properties of Artificial Grass Composites Affecting its Performance
Magdi El-Messiry, Samar Abdelatif, Rania El-Deeb and Sherine El-Tarahony
Textile Engineering Department, Faculty of Engineering, Alexandria University, Alexandria, 21544, Egypt
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 152-161, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.49
[Abstract] [Fulltext PDF]
Insight on Stock Market using Data Mining
Ashvi Rebecka.K , Joy Jeffery Camillo and Volga.A Mohanan
Department of CST Department of CST Department of CST Karunya Institute of Technology And Sciences.
Proceedings of the International conference on Applied Research in Engineering, Science and Technology , 162-171, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.50
[Abstract] [Fulltext PDF]
A research on Pelletızıng Propertıes of Vıneyard Resıdues
R.C. Akdeniz, O. Esmer and S.H. Shishvan
Ege University, Faculty of Agriculture, Department of Machinery and Technologies Engineering, Bornova/Izmir,35100, Turkey
Ege University, Graduate School of Natural and Applied Science Institute, Agricultural Machinery and Technologies Engineering, MSc Student, Bornova/Izmir, 35100, Turkey
Proceedings of the International conference on Applied Research in Engineering, Science and Technology ,172, 2018
DOI: http://www.doi.org/10.33422/icarest.2018.09.51
[Abstract] [Fulltext PDF]