Volume 2, Issue 1, 2019

European Journal of Engineering Science and Technology

Volume 2, Issue 1, 2019

INVESTIGATION OF THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF THIN 5083 ALUMINUM ALLOY PLATES WELDED BY DOUBLE PULSE GMAW METHOD

Gökçe Mehmet Gençer, Fatih Kahraman, Coşkun Yolcu, Ayça D. Kahraman and Ali Demircioğlu
European Journal of Engineering Science and Technology, Volume 2, Number 1, 1-10, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.45
[Abstract] [Fulltext PDF]


Insight on Stock Market using Data Mining

Ashvi Rebecka.K , Joy Jeffery Camillo and Volga.A Mohanan
European Journal of Engineering Science and Technology, Volume 2, Number 1, 11-24, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.46
[Abstract] [Fulltext PDF]


Improvement of the tribological characteristic of bimetallic journal bearing with surface coating by cold spray process

Coşkun Yolcu, Gökçe Mehmet Gençer, Fatih Kahraman and Ayça Demirer Kahraman
European Journal of Engineering Science and Technology, Volume 2, Number 1, 25-30, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.47
[Abstract] [Fulltext PDF]


Complex and thermodynamic properties of polar liquids using time domain reflectometry in Microwave frequency

Shagufta Tabassum and V. P. Pawar
European Journal of Engineering Science and Technology, Volume 2, Number 1,31-35 ,2019
DOI: http://doi.org/10.33422/EJEST.2019.01.48
[Abstract] [Fulltext PDF]


TRAMWAY DWELL TIME ESTIMATION AND ANALYSIS BY USING MULTIPLE LINEAR REGRESSION METHOD

Ehsan Amirnazmiafshar
European Journal of Engineering Science and Technology, Volume 2, Number 1,36-48, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.49
[Abstract] [Fulltext PDF]


Estimation of the Intrazonal Travel Time of Different Modes for the Home-Based School Trips Using Regression Model

Yavuz Delice, Halit Özenand Ehsan Amirnazmiafshar
European Journal of Engineering Science and Technology, Volume 2, Number 1,49-58, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.50
[Abstract] [Fulltext PDF]


Finite Elements Analysis of PLA 3D-printed Elements and Shape Optimization

P. Żur, A. Kołodziej and A. Baier
European Journal of Engineering Science and Technology, Volume 2, Number 1,59-64, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.51
[Abstract] [Fulltext PDF]


Influence of 3D-printing Parameters on Mechanical Properties of PLA defined in the Static Bending Test

A. Kołodziej, P. Żur, A. Baier and W. Borek
European Journal of Engineering Science and Technology, Volume 2, Number 1,65-70, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.52
[Abstract] [Fulltext PDF]


SWOT ANALYSIS OF ENERGY POLICY 2013 OF PAKISTAN

Muhammad Irfan, Suleman Abdul Hameed, Umer Bin Sarwar, Naeem Abas and Muhammad Shoaib Saleem
European Journal of Engineering Science and Technology, Volume 2, Number 1,71-94, 2019
DOI: http://doi.org/10.33422/EJEST.2019.01.53
[Abstract] [Fulltext PDF]