European Journal of Engineering Science and Technology
Year: 2019 | Volume: 2 | Issue: 1 | Page No: 65-70
DOI: http://doi.org/10.33422/EJEST.2019.01.52
Influence of 3D-printing Parameters on Mechanical Properties of PLA defined in the Static Bending Test
A. Kołodziej, P. Żur, A. Baier and W. Borek
ABSTRACT:
The paper presents optimization of the weight of elements printed in Fused Deposition Modelling (FDM) technology. For this purpose, the static bending test was carried out. The test was carried out in compliance with PN-EN ISO 178:2011 standard. Samples were made of polylactide (PLA). The influence of such parameters as filling density and type of filling or its orientation was examined. The collected data allowed to calculate the maximum stresses in the material used to improve the Silesian Greenpower car. Compared infill patterns and their density allowed to choose the optimal printing method.
How to cite this article:
Kołodziej,A.Żur,P.Baier,A.Borek,W.Influence of 3D-printing Parameters on Mechanical Properties of PLA defined in the Static Bending Test. European Journal of Engineering Science and Technology, 1 (2):65-70.